Jabiru Tools

Online Catalogue |  Jabiru |  Jabiru Tools

Compression Tester Extension 12mm
Out of Stock

Compression Tester Extension 12mm

Ref: CTE12MM

Quantity:


Price: 47.47 (56.96 Including VAT at 20%)


For 12mm spark plugs as fitted to Jabiru engines

3/8
Out of Stock

3/8" HSS Drill Bit

Ref: DB3/8HSS

Quantity:


Price: 2.65 (3.18 Including VAT at 20%)



12mm Spark Plug Socket

12mm Spark Plug Socket

Ref: DPR13155

Quantity:


Price: 6.21 (7.45 Including VAT at 20%)


Correct size for Jabiru D9EA plugs

Deep socket with a rubber insert for plug protection and retention. Manufactured from chrome vanadium steel hardened, tempered, chrome plated and polished for corrosion protection. Socket length 65mm.

People who bought this item also bought:
1. BOLT 3/16D. 7/8G. 1-9/32L. (Ref: AN3-12A)
2. Undercarriage Rubber Main Gear (Ref: 6034094)
3. BOLT 3/16D. 1-1/8G. 1-17/32L. (Ref: AN3-14A)

Torq Adaptor - 12 Point 7/16

Torq Adaptor - 12 Point 7/16" - 3/8" drive

Ref: FRDH141

Quantity:


Price: 52.62 (63.14 Including VAT at 20%)


2" Length - For Jabiru Cylider Base Nuts

Torq Adaptor - 12 Point 1/2
Out of Stock

Torq Adaptor - 12 Point 1/2" - 3/8" Drive

Ref: FRDH161

Quantity:


Price: 52.62 (63.14 Including VAT at 20%)


For use with 7/16 through bolt nuts

Surge Protected Jumper Leads 200 Amp 2.7M

Surge Protected Jumper Leads 200 Amp 2.7M

Ref: JUMPKIT

Quantity:


Price: 126.55 (151.86 Including VAT at 20%)


4 cyl & 6 cyl

Leads complete with positive connecter that iis permently wired intop aircraft. Polarity safe plud and socket.

Correctly installed allows jump start without cowl removal

1/4

1/4" Hex Bit Socket 126mm Long

Ref: KDKMSHA208L

Quantity:


Price: 19.97 (23.96 Including VAT at 20%)



8-32 Second Tap for Jabiru CHT

8-32 Second Tap for Jabiru CHT

Ref: TAP8-32NO2

Quantity:


Price: 16.58 (19.90 Including VAT at 20%)



Jabiuru Valve guide guages and reamer kit
Out of Stock

Jabiuru Valve guide guages and reamer kit

Ref: VGT

Quantity:


Price: 40.42 (48.50 Including VAT at 20%)


We now have in stock valve guide reamers and go/no go sets to measure your valve guides
Go/no go gauges are the easiest way to check your valve guides are within tolerance. The set includes one 7.04mm gauge and one 7.06mm gauge. The valve guide reamer will ensure that when used on tight (undersized) guides, it will leave a perfect 7.04mm guide.
7.04mm is the minimum bore size for valve guides. Anything less will heighten the risk of valve grab (sticky valves), which can lead to valves not sealing correctly, and if left unmaintained, will possibly cause the valve to ‘stick’ in the guide and collide with a piston.
We occasionally hear of maintainers and owners using the “calibrated wiggle test” to measure valve guides. This inaccurate method can possibly result in an engine being destroyed or valves guides being replaced when not necessarily needed. To assist owners and maintainers we have sourced this simple set of inexpensive tools to make the job easier for appropriately qualified people to use.

People who bought this item also bought:
1. Sump Washer Fibre Gasket (Ref: PE4A006N)
2. Aeroshell Oil 15W50 (Ref: AS15W50)
3. Rubber A775 Nose Gear (Ref: 6A045DOD)

Online Catalogue |  Jabiru |  Jabiru Tools