Online Catalogue |
Engine Instruments |
VDO CHT Gauge & Sender comes with 12mm ring for Jabiru spark plug fitmentThe cold junction of the CHT sender should be stable at around 22 deg C, so for every degree higher at the cold junction the gauge will display 1 degree lower and vice versa.
VDO CHT gauge and 12mm ring sender complete with extension leads.Colour band marking specifically for Jabiru J2200 and J3300 enginesThe cold junction of the CHT sender should be stable at around 22 deg C, so for every degree higher at the cold junction the gauge will display 1 degree lower and vice versa.
52mm, 12VDC, lever type
VDO EGT Gauge 250 to 1650 deg F.Sender not included
VDO Coolant Temperature GaugeElectrical operation complete with probe suitable for Rotax 912 and 582.
VDO Oil pressure gauge (electrical) 0-150 psi as normally fitted to Rotax 912. Usually dual scaled as picture or single scale in PSI.Sender not included
Standard 12 to 24 volt recording hour meter
VDO RPM gauge, engine choice selectable by dip switches on the rear casing 52mm
VDO Oil Pressure Gauge 5 BarSender not included
Sender not included
VDO oil pressure gauge in HCPA with painted in colour band markings for the correct range for Jabiru enginesSender not included but already fitted to new Jabiru engines
VDO Oil Temp Gauge 150 Degree CSender not included
VDO oil temperature gauge with painted in colour band markings for the correct range for Jabiru enginesSender not included, but fitted to new Jabiru engines when supplied
VDO Tachometer 0-4000 rpm, 80mm, with Hour Counter
VDO Voltmeter gauge as normally supplied with Jabiru kits, suitable for other applications. 8 to 16 volts. Green arc from 10.5 to 15 volts